[eesiFlo] S-Series Clamp on flowmeter
eesiFlo, S-Series, Clamp on flowmeter
제품개요
기술자료
액세서리
프로브Specifications
The EESIFLO Series meters are specifically designed for use with small pipes carrying water or chemicals and other types of liquids. The system is completely non-intrusive and requires little knowledge of ultrasonics to set up successfully . The advantage of this system is increased accuracy due to certain parameters that have been fixed by the clamping fixture provided The system can measure three sizes of pipe sizes 1/2, 3/8 and 3/4 inch pipes or others on request. Measurements can be made in a couple of minutes. The standard configuration is a panel mount version but other versions are available upon request including versions with permanently welded transducers
Applications
-Water measurements
-Chemical Measurement
-Oil Measurements
-Small pipe flow rates
-DI Water
-Saline Solution flow measurement
-Special Applications (Consult Factory)
Features
-Microprocessor controlled
-Programmable
-Easy to use
|
Measurement method |
Transit time |
|
Calculation method |
Microprocessor based |
|
Measurement fluids |
Water and other types of liquids (special applications on request) |
|
Measurement accuracy |
± 2% RD
(1m/s-10m/s range) Much Higher accuracies with modification of sensor
position |
|
Flow velocity range |
From 0-10 m/s |
|
Housing material |
Fibre Glass Resin. Temp Range -10 to 50°C (Display 0-50°C) |
|
Power requirement |
12-30 VDC |
|
Power concumption |
2.5 VA Max |
|
Weight Approx. |
330g |
|
Outputs |
Current Output
4-20 mA (load resistance 450 Ohms or less) |
|
Display |
Backlit LCD (16 Characters 2 Lines) Instanatneous Flow Rate , Flow Velocity and Totalised flow rate (selectable) |
|
Sensor clamping set |
Material PTFE Sensors, Operating conditions 10 to 60 °C (Higher temperature on request), Cable 5 metres as standard (10m available on request) |
